首頁 > Services

Services | SERVICES_DETAIL

Casting Metal stamping Laser cutting Plastic injection molding Forging Machining
01Casting
Lost wax casting/precision casting

To heat material and pour molten metal into a mold, then get the part of desired shape after solidifying.

  • 01wax injection

  • 02wax injection

  • 03wax pattern

  • 04dipping

  • 05dewax

  • 06sintering

  • 07pouring

  • 08shell removing

  • 09cutting

  • 10mfinished castings

Features: Suitable for complicated and precise parts with a refined surface, accurate dimensions and less machining cost.

Common materials: carbon steel 4140/8620, stainless steel
Dimension of finished products (mm): 40*20*5~50*230*55
Die casting

The die casting machine is used to apply high pressure to the mold so that the molten metal will be formed in the mold after cooling.

Most die castings are made from non-ferrous metals, specifically aluminium , zinc, copper , magnesium and tin-based alloys.

Features: High production capacity.
The finished products are mainly small size, it’ suitable for producing a thinner part.

Common materials: Aluminum alloy ADC 10/12, Zinc alloy Zamak 3
Dimension of finished products (mm): 15*25*10~250*50*20
Gravity casting

The molten metal is poured into the mold under the force of gravity, then get cooling and forming.

Features: High structure density, refined surface and precise dimensions,with lower cost and long life in mold.

Common materials: A356
Dimension of finished products (mm):150*180*70~250*160*70
02Metal stamping

Metal stamping is the cold working process that transforms sheet metal into specific, preset shapes with mold and stamping machine.

Feature: Mass production, high precision and lower post-processing cost.

Common materials: SPCC, SUS304
Dimension of finished products (mm): 7*10*3~350*110*25
Bending/welding/riveting/swage nut/screw are available.
03Laser cutting

Feature: High efficiency for small lot production, high precision and suitable for any materials.

Common materials: SPCC, SUS304
Bending/welding/riveting/swage nut/screw are available.
04Plastic injection molding

To heat and inject the molten plastics into a mold, then get the part of desired shape after cooling.

Features: to make the complicated and high precision products.
Available for -Double-shot injection molding-molding-Ultrasonic welding

Common materials: FR3005/PP/PVC/PA/PA+GF/ABS/TPE
Dimension of finished products (mm): 20*5*2~ 120*95*25
05Forging

Deform metal material by compressive force and get the desired shape with mold..

Forging is often classified according to the temperature at which it is performed: -Cold forging (a type of cold working) -Warm forging -Hot forging (a type of hot working)

Feature: Physical, high strength, good tenacity

Common materials: carbon steel S45C/ aluminum alloy
Dimension of finished products (mm):330*30*6~526*22*31
06Machining

Machine the material to the desired shape/refine dimensions of raw parts: Turning/milling Drilling/broaching Grinding/polishing

TOP